Most Popular from Category
Wearpai P80 Smart Band Women Men Full Screen Touch Fitness Tracker Blood Pressure Sleep Monitor Sport Smart Watch for iOS Android,Support Dropshipping
why choose us ?
【COLOR SCREEN&INTERFACES】Easy operation and sensitive response, the color screen the sunlight is clearly visible, the bracelet have main interface options.
【MORE FEATURES】The fitness tracker supports more accurate heart rate monitoring, blood pressure,blood oxygen, music control, sleep monitoring, message, sedentary remind, incoming call,alarm,dimming,check the phone and more. You can read messages on the fitness tracker from Facebook, What Sapp , Twitter, Line, etc.
【WIDE COMPATIBILITY】The app supports most smart phones with Bluetooth 4.4,Support system: iOS 8.4 or above,Bluetooth 4.0
Notes on charging
1. When charging, use a computer USB interface or choose a power adapter with an output not exceeding 5V
2. Make sure that the metal contacts on the watch body and the magnetic charging cable are not dirty
3. Please clean the back of the watch and the metal contacts of the magnetic charging cable with a clean flannel regularly.
Note:You can't put it in water and can't swim with it The bracelet can't touch the hot water because the hot water has water vapor.
Main Display : TFT 240*240 ,1.3inch
Type of battery: li-ion battery
Standby time: about 5-10 days
Compatilbe:IOS 9.0 or above/ Android 4.4 or higher
Sport Mode:walk,run,cycling,basketball,football,badminton,rope skipping
Step counter: Support
Sleep Monitoring: Support
Heart rate: support
Heart Rate Monitoring: Support
Sedentary reminder: Support
Blood Pressure: Support
Sports Mode: Support
Find bracelet: support
UI interface selection : support
“Call, SMS, WeChat, QQ, whatsapp, facebook,Instagram,Kakao Talk,twitter,line notification alert”: Support
Shake Photograph: Support
“Do not disturb mode (22:00-8:00 bracelet stop receiving notification, raise the hand bright screen function has no effect)”: Support
Find the phone: support
Factory reset: Support
1 x Smart Bracelet,1x charger , 1x English User Manual
Introduction to watch function:
Sleep:The watch can record and display the total length of your sleep last night and the length of your deep sleep and light sleep.More detailed analysis and data logging can be viewed in the client
Weather information:The weather page shows the current weather, air quality information, and tomorrow's status. Weather information needs to be connected to the client before data can be obtained. If the connection is disconnected for a long time, the weather information will not be updated.
Work out:Long press on the exercise page to start an exercise measurement record, there are 8 sports modes to choose from The last workout record information can be displayed on the exercise page.
Message push:The watch can receive notiﬁcation pushes on the display phonePush item switch can be set inthe client The watch message page can store the last 3 message records
Camera control:When connected to a mobile phone,the watch can be used as a mobile phone camera remote control After turning on the camera on the phone,click on the watch camera control page to trigger the phone camera shutter
Music control:After connecting the phone, the watch can control the phone' s music player When the phone is playing music, you can use the watch to control the phone to play/pause, previous and next operations.
Smart alarm clock:The smart alarm clock of the watch can be set in the client.Up to 3 alarm clocks can be set When setting the time, the watch will display the alarm icon and vibrate
How to use it >>
step 1 : Please charge your new device for at least 10 minutes or more before the first usage, this ensures normal device boot and optimal operation.
step 2 : Power on ( long-press 5-7 sec this button to power on )
tips : long-press button you can Switch to power on /off page , back to home
step 3 : download app ,Please search “Wearfit 2.0 ” in your APP store and android market . and then download it ,and then Bind Bracelet ,(first time open APP ,click bind bracelet )
step 4: open phone bluetooth ; search bluetooth in APP ,and connect bluetooth
step 5 : once your bleutooth has been connected, the Data will be Sync , and watches time will Sync with your phone
step 6: you can click mine ,to fill in your information
step 7: you can click device management , setting call reminder / message reminder etc function
FQA for P80 fitness tracker >>
Q:Why is the blood pressure value deviated from the sphygmomanometer?
A:The deviation between the measurement value of the watch and the sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is in the radial artery, and the measurement site of the watch is the two main branches of the arteriole. Normaly, the aortic blood pressure measurement and the arteriole Blood pressure measurements will vary by three to forty; if you use a watch and a sphygmomanometer to measure at the same time, because the blood ﬂows in the artery in the direction of the centrifuge, the sphygmomanometer measures the straps so that the lower part of your elbow is under pressure. Temporary blood cannot ﬂow smoothly to the branch of the artery below, and the vascular tension is increased, which will make the upper and lower blood pressure measurement values more biased.
Q:Why can't the watch receive the message push?
A:Android phone settings1. Conﬁrm that the message push switch is enabled on the mobile client.2. The conﬁrmation message can be displayed normally in the mobile phone notiﬁcation bar. The watch message push is pushed by reading the mobile phone notiﬁcation bar message; if there is no message in the mobile phone notiﬁcation bar, the watch will not be able to receive the push(need to ﬁnd the notiﬁcation setting in the phone settings, open WeChat, QQ phone, SMS, notiﬁcation button of mobile client)3. Open the auxiliary function settings of the wristband client(see the auxiliary function in the settings on the phone, and open the auxiliary function settings of the wristband client)
Apple phone settings:1. Conﬁrm that the message push switch is enabled on the mobile client.2. the conﬁrmation message can be displayed normally in the mobile phone notiﬁcation bar(need to ﬁnd the notiﬁcation settings in the phone settings, open WeChat, QQ phone, SMS, mobile phone client notiﬁcation switch)
Q:Why does the pedometer not count steps when I have already started walking?
A:To reduce errors, smart watch usually sets an initial value of 10, it will count steps when we walk more than 10 steps. The APP will show the real walking steps and start counting from step 10.
Q:What application is used when connecting to a smart phone?
A:App is “wearfit 2.0”,The app is designed by the supplier. You can scan the QR code on the package or manual to download it when you get the item.
Q:Why the device cannot boot or start up properly?
A:Please charge your new device for at least 10 minutes or more before the first usage, this ensures normal device boot and optimal operation. For devices with removable batteries, ensure they are properly installed before charging.
Q: Can not find device when pairing device?
A:Please make sure the distance between phone and device less than 0.5m
Please make sure the device is not under low battey.if there is still problem after 1.5hours charging,Please cantact us.
Q:Can not connect the devicewith app?
A:Some smart phone bluetooth service will be abnormal when reboot.Please reboot the smart phone for pairing device.
Q:Why the android mobile disconnect?
A:Android mobile phone system memory management will be forced to turn off the background app,you need to turn off the power saving mode or pull the app into the ayatem housekeeping green background inside,app will not be forced to close.app must be running in the background,bluetooth will not automatically disconnect.
For the problem that the bracelet can measure the heart rate in things and in the air, the following explanation is made:
1.At present, the mainstream heart rate bracelets on the market adopt the same measurement method. The principle is not complicated, that is, the PMG signal of the radial artery is obtained by the reflective photoelectric measurement method, and the fast Fourier transform is performed on the PPG signal to analyze the frequency domain. To achieve the detection of the human heart rate. To put it simply, it is to use a light to the artery and then reflect it back. Based on the change of the reflected light, the heart rate of the human body is calculated.
2.Due to many factors such as the physiological structure of the human body, the color of muscles and blood, green light is the color with the highest passing rate in the human body. Therefore, the light source of the heart rate sensor uses green light to achieve minimum loss and interference.
3.Heart rate wristband detection focuses on human tissue. Some data is also read for non-human objects. This is a known and normal phenomenon. After the data is based on the principle of light reflection, the heart rate detection will have a reading. This situation cannot be All avoided, so there will be problems with heart rate data in the case of heart rate bracelet (table) in the case of “air test”
* 1. Items will be shipped timely after the payment verification.
* 2.The Aliexpress standard shipping time of arrival is between 15 to 60 days . If your item does not arrive within 40 days, please let us know.
* 3.If there is no logistics information, please contact us first to help you inquire.
* 1.If the product will not be used, don't worry, please contact us first, we will help you solve it. Due to the time difference, we usually reply within 24 hours, except holidays.
* 2.One year warranty for the product you ordered from us!
* 3.We can't offer warranty service for products which have Man-made damage, including but not limited to: bumped by user / fall in water by user / disassemble by user / other man-made damage detected by the official service center.
* 4.For returned product, Please write your order No. on a paper and put it into the box.Tell us the return tracking No. and tracking site.
We regard customers as our friends. We hope our products can satisfy you. We are trying our best to make you happy. Please do not forget to leave us 5-Star feedback. Cheers.
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|
Most Popular from Category
Haylou GT1 TWS Fingerprint Touch Bluetooth Earphones, HD Stereo Wireless Headphones,Noise Cancelling Gaming Headset
i7s tws Wireless Headphones Bluetooth 5.0 Earphones sport Earbuds Headset With Mic Charging box Headphones For all smartphones
Original Xiaomi Redmi Airdots TWS Headphones Xiaomi Wireless earphone Voice control Bluetooth 5.0 Noise reduction Tap Control
Original Lenovo XT91 TWS Earphone Wireless Bluetooth Headphones AI Control Gaming Headset Stereo bass With Mic Noise Reduction
Roreta Dual Drive Stereo Wired earphone In-Ear Sport Headset With Mic mini Earbuds Earphones For iPhone Samsung Huawei Xiaomi
H&A Bluetooth V5.0 Earphone Wireless Earphones Stereo Sport Wireless Headphones Earbuds headset 2000 mAh Power For iPhone Xiaomi
Do you know that you can save up to 90% on your
online shopping, buying directly from manufacturers?
online shopping, buying directly from manufacturers?
And it is very easy:
- Go to Alibaba.com and enter the wanted item into search field.
- Having made your choice, click "Contact supplier" button on the right
- On the next page enter your request and click "Send" button.
- Upon clicking you will be asked to get registered. Do it and wait for the reply.
ARE YOU READY TO SAVE UP TO 90%?GO TO ALIBABA