IFlight Protek35 HD Beast AIO F7 45A Caddx Nebula Nano HD XING 2203.5 3600KV 4S 6S 2205 151mm 3.5inch FPV FPV Cinewhoop RC Drone

94 % of buyers enjoyed this product!
Availability: in stock
Color: 4S Black PNP for DJI 4S Black XMplus BNF 4S Black R-XSR BNF 4S Black TBS BNF 4SYellow PNP for DJI 4S Yellow XMplus BNF 4S Yellow R-XSR BNF 4S Yellow TBS BNF 6S Black PNP for DJI 6S Black XMplus BNF 6S Black R-XSR BNF 6S Black TBS BNF
Price:  US $878.30
Sale Price:  US $439.15
from AliExpress
45 days Money back 45 days Money back Returns accepted if product not as described, buyer pays return shipping; or keep the product & agree refund with seller.
On-time Delivery On-time Delivery
Guarantees: On-time Delivery 60 days

Note: the camrea is Nebula Nano HD camera.

After our very popular 3inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.

Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here…

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to it's 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves.

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization).

Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

Need a naked GoPro case or mount? Checkout our new iFlight naked GoPro Hero8 TPU case to use with your ProTek35.LINK


– UPGRADED PROP GUARDS V2.0 (Material optimized)

*No Props or frame in view!

*High performanceTrue-AIO Board Beast Whoop F7 AIO 45Ato save weight and space

*T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

*Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

*Low Resonance frame construction (Less Jello, more Cinematic footage)

*Nebula Nano Digital HD System

*Butter smooth2203.5 3600KV (4S) 2205 2300kv(6s)

*Pre-tuned with smooth freestyle settings

ProTek35 BNF Specs:

*Board Beast Whoop F7 AIO 45A(LINK)

*Motor: XING 2203.5 3600KV (4S)(LINK)

*Wheelbase: 151mm

*Body Size: 118*94.5mmmm

*Bottom plate thickness: 3.5mm

*Top plate thickness: 2mm

*Top and bottom plate spacing: 20mm (aluminum standoff height)

*Propeller size: 3.5 inch

*FC pattern: 25.5*25.5mm / 20*20mmmm

*FPV cam spacing: 20mm

*Weight: 348.3g (without battery)

ProTek35 HD Quad BNF Included Components and Parts

pre-built and tested Quadcopter

1 x ProTek35 Frame

1 xNebula Nano Digital HD System Kit

2 xAlbatross LHCP RP-SMA 5.8g antenna

1 x TPU Bracket forNebula Nano Air Unit

2 x Nazgul 3535 propeller (Set of 4 – Color May Vary)

1 x iFlight Lipo Strap 15*150mm (Color May Vary)

1 x  iFlight Lipo Strap 15*250mm (Color May Vary)

1 x GoPro TPU bottom stand black (GoPro Protector not included)

FC // Beast F7 AIO(LINK)


Gyro: MPU6000

UARTs: 5

Blackbox: 8Mb Onboard Flash

BEC output: 5V 2.5A

Barometer: BMP280

Connector: Micro-USB

OSD: AT7456E

FC Firmware:IFLIGHT_F745_AIO

Mounting pattern: 25.5*25.5mm φ3mm

Dimensions: 32.5*32.5mm

Weight: 8.5g

ESC // 45A 2-6S(LINK)

*Current Sensor: Yes

*Input: 2-6S LIPO

*Current scale: 200

*Constant: 45A / Burst: 50A

*BLHeli: BLHeli-S

*RPM-Filter ready: Yes (JazzMaverick or JESC firmware)

*Telemetry: no

*ESC Firmware: BlheliS G-H-30

*Mounting pattern: 25.5*25.5mm/Φ3mm

*Dimensions: 32.5*32.5mm


The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Shipping Company Shipping Cost Estimated Delivery Time
DHL 3 - 7 days
UPS Expedited 3 - 7 days
EMS 5 - 14 days
Post Air Mail Free Shipping 15 - 45 days
Return Policy If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
Seller Service On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).

Most Popular from Category

Price:  US $878.30
Sale Price:  US $439.15
from AliExpress